|
Still deciding? Get samples of $ !
Request Sample
|
| Customization: | Available |
|---|---|
| After-sales Service: | Available |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Overall dimensions | 1300mm×1000mm×2800mm |
| Working chamber size | φ400mm×600mm |
| Door opening method: | Cylinder automatic switch |
| Sandblasting method | Suction type (general pressure type) |
| Dust removal fan | 380V/50HZ, 2.2KW |
| Power supply | 380V |
| Total power | 3.5KW |
| Air pressure | 7bar(kg/cm²) |
Simply load parts on the rubber belt and set the timer, then return later to unload perfectly cleaned or finished parts. Parts tumble on a thick, perforated rubber belt, a group of blast guns uniformly blast medias to all exposed surfaces to deliver a consistent finish automatically. Nozzles are mounted on an oscillating blast gun to ensure maximum coverage of all parts.
The workpiece to be processed is placed on the crawler, which moves slowly under the action of the driving device, so that the workpiece passes through the sandblasting chamber at a uniform speed.
The automatic tumble belt sandblasting machines are used for surface cleaning of cast, pressed, heat treated, forged, etc. products without sharp corners and suitable for rounding. Ability to sandblast small and medium sized parts is the significant advantage.
Q:1. How to use sand with?
A:Hardware, iron parts, metal parts, steel parts, molds and other surface cleaning or new, with brown corundum and white corundum. Stainless steel, copper parts, aluminum parts, zinc alloy products do not need to be reprocessed after sandblasting, or the surface requires brightness with glass beads. White corundum applicable material crystal, acrylic, glass, (acrylic sandblasting to see what effect if it is required to be very fog, the general spray glass sand, if the requirements of a little higher you can choose white corundum, if the requirements are not very foggy, there is a certain degree of transparency, it is necessary to choose the glass beads, the above can be based on the actual effect of the choice of grit and grit coarseness.
Q:2. What are the specifications of some common sands?
A:Brown and white corundum number is 24, 36, 46, 60, 80, 100, 120, 180, 220, 280 number, glass beads number is 40, 60, 80, 100, 180, 220 number 120, 150, 280, 320 recommended plus temperature control, black silicon carbide number is 16, 24, 36, 46, 60, 80, 100, 120, 150, 180, 220, 280, 320, the smaller the sand number the coarser the sand, the larger the number, the finer the sand.
Q: 3. How many kinds of sand?
A:There are glass beads, brown corundum, white corundum, black silicon carbide, walnut sand, plastic sand, ceramic sand, steel shot, stainless steel shot.
Q: 4. Can I use the machine when I buy it back?
A: The machine accessories are complete, parents buy back only need to connect the air compressor gas source and 1220v power supply, plus sand can be used.
Q: 5. sandblasting machine will have a lot of dust?
A: The product is a box-type sand blasting machine, all the sand blasting work is completed in a closed box, and is equipped with a dust-absorbing filtration system, the dust generated by sand blasting will be absorbed by the dust blower in the dust collection box, in accordance with the specifications for use of the daily cleanup can be, so it will not produce a lot of dust, you can rest assured that the use of the machine.
Q: 6. What products can be sprayed by the sand blasting machine?
A: Sand blasting machine is applicable to a wide range of products, whether it is metal rust, paint, oxidation layer, increase the roughness, or glass or acrylic atomization, monument lettering, walnut cleaning, etc., covering almost all industries.
){kind=link}