| Customization: | Available |
|---|---|
| After-sales Service: | Available |
| Warranty: | 1 Year |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1. Mainly used in the surface treatment of the workpiece;
2. Sealed design of the box, automatic circulation of abrasive, more economical and environmentally friendly use;
3. The observation window is wide and transparent, and the box is equipped with fluorescent lamps, which is convenient for operation under various light conditions;
4. Open door design, convenient to take parts;
5. Plastic spraying inside and outside, 2mm thick steel legs (1.5mm thick box panel).
1. Metal parts are basically undamaged and the dimensional accuracy will not change;
2. The surface of the parts is not polluted, and the abrasive will not have chemical reaction with the material of the parts;
3. It is easy to deal with the parts which are difficult to be contacted by grooves, and a variety of grain sizes of abrasives can be selected for use;
4. Processing costs are greatly reduced, mainly reflected in the improvement of work efficiency, can meet a variety of surface finishing requirements;
5. Low energy consumption and cost saving.
The main use of sand blasting machine
1. Cleaning and strengthening of the outer surface of parts and components;
2. Cleaning and strengthening of tools and materials:
3. Surface cleaning of parts before plating, oxidizing and painting;
4. Removal of contaminants on the surfaces of barrels, tubes, plates, tanks and utensils;
5. Cleaning of tools, molds, tubes, plates and operating parts;
6. Surface cleaning of glass molds, rubber molds, metal castings and extrusions;
7. Trimming of weld seams;
8. Glazing of workpiece surfaces;
9. Removal of oxide skin on the surface of workpieces and removal of color differences produced during processing (castings, forgings);
10. Clean up large turbines, engine castings or complex small parts;
11. Cleaning of parts (such as cylinder blocks, pistons and spark plugs) during engine maintenance;
12. Cleaning the surface of brushes, contactors and wiring arts, etc., to improve electrical conductivity;
13. Parchment and other artwork cleaning and preservation;
14. Removal of old paint and dirt on the surface of workpieces, etc.
| Model | HST-SBC90 | HST-SBC100 | HST-SBC150 | HST-SBC220 | HST-SBC350 |
| Outside Size(mm) | 580×495×565 | 620×500×530 | 695×580×625 | 1500×830×630 | 1000×610×1630 |
| Packing Size(mm) | 600×515×585 | 640×520×560 | 715×600×645 | 930×635×690 | 1280×990×760 |
| Weight (kg) | 25 | 26 | 28 | 57 | 125 |
| Working Pressure | 5 CFM at 100 PSI | 5 CFM at 100 PSI | 5 CFM at 100 PSI | 15-25 CFM 40-125 PSI | 15-25 CFM 60-120 PSI |
| Working Area | 570 × 420 | 580 × 420 | 640 × 540 | 600 × 840 × 630 | 945 × 605 × 600 |
Q:1. How to use sand with?
A:Hardware, iron parts, metal parts, steel parts, molds and other surface cleaning or new, with brown corundum and white corundum. Stainless steel, copper parts, aluminum parts, zinc alloy products do not need to be reprocessed after sandblasting, or the surface requires brightness with glass beads. White corundum applicable material crystal, acrylic, glass, (acrylic sandblasting to see what effect if it is required to be very fog, the general spray glass sand, if the requirements of a little higher you can choose white corundum, if the requirements are not very foggy, there is a certain degree of transparency, it is necessary to choose the glass beads, the above can be based on the actual effect of the choice of grit and grit coarseness.
Q:2. What are the specifications of some common sands?
A:Brown and white corundum number is 24, 36, 46, 60, 80, 100, 120, 180, 220, 280 number, glass beads number is 40, 60, 80, 100, 180, 220 number 120, 150, 280, 320 recommended plus temperature control, black silicon carbide number is 16, 24, 36, 46, 60, 80, 100, 120, 150, 180, 220, 280, 320, the smaller the sand number the coarser the sand, the larger the number, the finer the sand.
Q: 3. How many kinds of sand?
A:There are glass beads, brown corundum, white corundum, black silicon carbide, walnut sand, plastic sand, ceramic sand, steel shot, stainless steel shot.
Q: 4. Can I use the machine when I buy it back?
A: The machine accessories are complete, parents buy back only need to connect the air compressor gas source and 1220v power supply, plus sand can be used.
Q: 5. sandblasting machine will have a lot of dust?
A: The product is a box-type sand blasting machine, all the sand blasting work is completed in a closed box, and is equipped with a dust-absorbing filtration system, the dust generated by sand blasting will be absorbed by the dust blower in the dust collection box, in accordance with the specifications for use of the daily cleanup can be, so it will not produce a lot of dust, you can rest assured that the use of the machine.
Q: 6. What products can be sprayed by the sand blasting machine?
A: Sand blasting machine is applicable to a wide range of products, whether it is metal rust, paint, oxidation layer, increase the roughness, or glass or acrylic atomization, monument lettering, walnut cleaning, etc., covering almost all industries.
){kind=link}