Customization: | Available |
---|---|
After-sales Service: | Available |
Warranty: | 1 Year |
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
The use of abrasives on the surface of the workpiece impact and cutting effect, so that the surface of the workpiece to obtain a certain degree of cleanliness and different roughness, so that the mechanical properties of the surface of the workpiece has been improved, so improve the fatigue resistance of the workpiece, increase the adhesion between it and the coating, prolonging the durability of the film, but also conducive to the leveling of the coatings and decorative, the surface of the impurities, impurity and oxidized layer to remove the surface, and at the same time to make the surface of the media Roughening, eliminating residual stress in the workpiece and improving the surface hardness of the substrate.
1. Advanced design, easy to operate, years of mass production models, with the same industry comparatively high production quality and stability.
2. The introduction of foreign technology and optimization of the design of the cyclone separation system, improve the efficiency of sandblasting, reduce the consumption of consumables, greatly reducing the use of customer costs.
3. New and improved one-piece dust collector, which does not produce floating dust when working, and greatly improves the pollution of dust to the environment as well as the health hazards to the operators.
4. Humanized design, small footprint, easy maintenance and overhaul.
All kinds of plastics, handicrafts, hardware decorations surface finishing, remove scratches, enhance the roughness, clean up the surface; casting parts, stamping parts, special treatment parts to remove oxidation skin, rust, parts refurbishment, glossy and matte, all metal products, glass, plastic handicrafts, jewelry, eyeglasses, clocks and watches of the surface treatment.
Model | HST-970A |
Overall dimensions | 900×1200×1700 |
Cabin size | 880×680×600 |
Weight (kg) | 300 |
Dedusting Type | Precision filter element×1 |
Dust Removal Fan | Single-phase 550W |
Cyclone Separator | Yes |
Available abrasives | Glass beads, Brown corundum |
Type of Blasting | Dry |
Total power | 0.75 KW |
Voltage | Customizable |
Color | White (can be customized) |
Door Opening | One side |
Pressure | 0.4-0.8Mpa (80-125 PSI) |
Number of Gun | 1pc |
Q:1. How to use sand with?
A:Hardware, iron parts, metal parts, steel parts, molds and other surface cleaning or new, with brown corundum and white corundum. Stainless steel, copper parts, aluminum parts, zinc alloy products do not need to be reprocessed after sandblasting, or the surface requires brightness with glass beads. White corundum applicable material crystal, acrylic, glass, (acrylic sandblasting to see what effect if it is required to be very fog, the general spray glass sand, if the requirements of a little higher you can choose white corundum, if the requirements are not very foggy, there is a certain degree of transparency, it is necessary to choose the glass beads, the above can be based on the actual effect of the choice of grit and grit coarseness.
Q:2. What are the specifications of some common sands?
A:Brown and white corundum number is 24, 36, 46, 60, 80, 100, 120, 180, 220, 280 number, glass beads number is 40, 60, 80, 100, 180, 220 number 120, 150, 280, 320 recommended plus temperature control, black silicon carbide number is 16, 24, 36, 46, 60, 80, 100, 120, 150, 180, 220, 280, 320, the smaller the sand number the coarser the sand, the larger the number, the finer the sand.
Q: 3. How many kinds of sand?
A:There are glass beads, brown corundum, white corundum, black silicon carbide, walnut sand, plastic sand, ceramic sand, steel shot, stainless steel shot.
Q: 4. Can I use the machine when I buy it back?
A: The machine accessories are complete, parents buy back only need to connect the air compressor gas source and 1220v power supply, plus sand can be used.
Q: 5. sandblasting machine will have a lot of dust?
A: The product is a box-type sand blasting machine, all the sand blasting work is completed in a closed box, and is equipped with a dust-absorbing filtration system, the dust generated by sand blasting will be absorbed by the dust blower in the dust collection box, in accordance with the specifications for use of the daily cleanup can be, so it will not produce a lot of dust, you can rest assured that the use of the machine.
Q: 6. What products can be sprayed by the sand blasting machine?
A: Sand blasting machine is applicable to a wide range of products, whether it is metal rust, paint, oxidation layer, increase the roughness, or glass or acrylic atomization, monument lettering, walnut cleaning, etc., covering almost all industries.