Holdwin China Suppliers 220L Box Type Manual Sand Blasting Machine Industrial Dry Sand Blaster Cabinet for Sale

Product Description

Box Type Manual Sand Blasting Machine

 

Product Description

     The principle of sand blasting machine is: with high speed air driven sand, friction treatment surface, to achieve a sanding effect, used for metal surface rust, oil paint, wood peeling, plastic sanding and so on.
     Note: The product also needs to be connected to the air compressor with the use of 8kg air pressure, about 1500w air compressor is more appropriate.

Advantages of the Equipment

    1. Metal parts are basically undamaged and the dimensional accuracy will not change;
    2. The surface of the parts is not polluted, and the abrasive will not have chemical reaction with the material of the parts;
    3. It is easy to deal with the parts which are difficult to be contacted by grooves, and a variety of grain sizes of abrasives can be selected for use;
    4. Processing costs are greatly reduced, mainly reflected in the improvement of work efficiency, can meet a variety of surface finishing requirements;
    5. Low energy consumption and cost saving.

Performance Characteristics

Fully enclosed cabin

Safe, relaxing and dust-free
Sand can be recycled

Connection of sand blasting gun

Thin tube connected to air source
Thick tube connects to the bottom to suck sand

Wide and transparent observation window, easy to observe the sand blasting effect.
Open door design, easy to pick up the parts.

 

 

Scope of Application

The main use of sand blasting machine
    1. Cleaning and strengthening of the outer surface of parts and components;
    2. Cleaning and strengthening of tools and materials:
    3. Surface cleaning of parts before plating, oxidizing and painting;
    4. Removal of contaminants on the surfaces of barrels, tubes, plates, tanks and utensils;
    5. Cleaning of tools, molds, tubes, plates and operating parts;
    6. Surface cleaning of glass molds, rubber molds, metal castings and extrusions;
    7. Trimming of weld seams;
    8. Glazing of workpiece surfaces;
    9. Removal of oxide skin on the surface of workpieces and removal of color differences produced during processing (castings, forgings);
    10. Clean up large turbines, engine castings or complex small parts;
    11. Cleaning of parts (such as cylinder blocks, pistons and spark plugs) during engine maintenance;
    12. Cleaning the surface of brushes, contactors and wiring arts, etc., to improve electrical conductivity;
    13. Parchment and other artwork cleaning and preservation;
    14. Removal of old paint and dirt on the surface of workpieces, etc.

Product Parameters

Model	HST-SBC90	HST-SBC100	HST-SBC150	HST-SBC220	HST-SBC350
Outside Size(mm)	580×495×565	620×500×530	695×580×625	1500×830×630	1000×610×1630
Packing Size(mm)	600×515×585	640×520×560	715×600×645	930×635×690	1280×990×760
Weight (kg)	25	26	28	57	125
Working Pressure	5 CFM at 100 PSI	5 CFM at 100 PSI	5 CFM at 100 PSI	15-25 CFM 40-125 PSI	15-25 CFM 60-120 PSI
Working Area	570 × 420	580 × 420	640 × 540	600 × 840 × 630	945 × 605 × 600

Detailed Photos

FAQ

Q:1. How to use sand with?
     A:Hardware, iron parts, metal parts, steel parts, molds and other surface cleaning or new, with brown corundum and white corundum. Stainless steel, copper parts, aluminum parts, zinc alloy products do not need to be reprocessed after sandblasting, or the surface requires brightness with glass beads. White corundum applicable material crystal, acrylic, glass, (acrylic sandblasting to see what effect if it is required to be very fog, the general spray glass sand, if the requirements of a little higher you can choose white corundum, if the requirements are not very foggy, there is a certain degree of transparency, it is necessary to choose the glass beads, the above can be based on the actual effect of the choice of grit and grit coarseness.

Q:2. What are the specifications of some common sands?
     A:Brown and white corundum number is 24, 36, 46, 60, 80, 100, 120, 180, 220, 280 number, glass beads number is 40, 60, 80, 100, 180, 220 number 120, 150, 280, 320 recommended plus temperature control, black silicon carbide number is 16, 24, 36, 46, 60, 80, 100, 120, 150, 180, 220, 280, 320, the smaller the sand number the coarser the sand, the larger the number, the finer the sand.

Q: 3. How many kinds of sand?
     A:There are glass beads, brown corundum, white corundum, black silicon carbide, walnut sand, plastic sand, ceramic sand, steel shot, stainless steel shot.

Q: 4. Can I use the machine when I buy it back?
     A: The machine accessories are complete, parents buy back only need to connect the air compressor gas source and 1220v power supply, plus sand can be used.

Q: 5. sandblasting machine will have a lot of dust?
     A: The product is a box-type sand blasting machine, all the sand blasting work is completed in a closed box, and is equipped with a dust-absorbing filtration system, the dust generated by sand blasting will be absorbed by the dust blower in the dust collection box, in accordance with the specifications for use of the daily cleanup can be, so it will not produce a lot of dust, you can rest assured that the use of the machine.

Q: 6. What products can be sprayed by the sand blasting machine?
     A: Sand blasting machine is applicable to a wide range of products, whether it is metal rust, paint, oxidation layer, increase the roughness, or glass or acrylic atomization, monument lettering, walnut cleaning, etc., covering almost all industries.